## Stacked PRs
This work is now effectively split across two steps:
- #14178: add custom CA support for browser and device-code login flows,
docs, and hermetic subprocess tests
- #14239: extend that shared custom CA handling across Codex HTTPS
clients and secure websocket TLS
Note: #14240 was merged into this branch while it was stacked on top of
this PR. This PR now subsumes that websocket follow-up and should be
treated as the combined change.
Builds on top of #14178.
## Problem
Custom CA support landed first in the login path, but the real
requirement is broader. Codex constructs outbound TLS clients in
multiple places, and both HTTPS and secure websocket paths can fail
behind enterprise TLS interception if they do not honor
`CODEX_CA_CERTIFICATE` or `SSL_CERT_FILE` consistently.
This PR broadens the shared custom-CA logic beyond login and applies the
same policy to websocket TLS, so the enterprise-proxy story is no longer
split between “HTTPS works” and “websockets still fail”.
## What This Delivers
Custom CA support is no longer limited to login. Codex outbound HTTPS
clients and secure websocket connections can now honor the same
`CODEX_CA_CERTIFICATE` / `SSL_CERT_FILE` configuration, so enterprise
proxy/intercept setups work more consistently end-to-end.
For users and operators, nothing new needs to be configured beyond the
same CA env vars introduced in #14178. The change is that more of Codex
now respects them, including websocket-backed flows that were previously
still using default trust roots.
I also manually validated the proxy path locally with mitmproxy using:
`CODEX_CA_CERTIFICATE=~/.mitmproxy/mitmproxy-ca-cert.pem
HTTPS_PROXY=http://127.0.0.1:8080 just codex`
with mitmproxy installed via `brew install mitmproxy` and configured as
the macOS system proxy.
## Mental model
`codex-client` is now the owner of shared custom-CA policy for outbound
TLS client construction. Reqwest callers start from the builder
configuration they already need, then pass that builder through
`build_reqwest_client_with_custom_ca(...)`. Websocket callers ask the
same module for a rustls client config when a custom CA bundle is
configured.
The env precedence is the same everywhere:
- `CODEX_CA_CERTIFICATE` wins
- otherwise fall back to `SSL_CERT_FILE`
- otherwise use system roots
The helper is intentionally narrow. It loads every usable certificate
from the configured PEM bundle into the appropriate root store and
returns either a configured transport or a typed error that explains
what went wrong.
## Non-goals
This does not add handshake-level integration tests against a live TLS
endpoint. It does not validate that the configured bundle forms a
meaningful certificate chain. It also does not try to force every
transport in the repo through one abstraction; it extends the shared CA
policy across the reqwest and websocket paths that actually needed it.
## Tradeoffs
The main tradeoff is centralizing CA behavior in `codex-client` while
still leaving adoption up to call sites. That keeps the implementation
additive and reviewable, but it means the rule "outbound Codex TLS that
should honor enterprise roots must use the shared helper" is still
partly enforced socially rather than by types.
For websockets, the shared helper only builds an explicit rustls config
when a custom CA bundle is configured. When no override env var is set,
websocket callers still use their ordinary default connector path.
## Architecture
`codex-client::custom_ca` now owns CA bundle selection, PEM
normalization, mixed-section parsing, certificate extraction, typed
CA-loading errors, and optional rustls client-config construction for
websocket TLS.
The affected consumers now call into that shared helper directly rather
than carrying login-local CA behavior:
- backend-client
- cloud-tasks
- RMCP client paths that use `reqwest`
- TUI voice HTTP paths
- `codex-core` default reqwest client construction
- `codex-api` websocket clients for both responses and realtime
websocket connections
The subprocess CA probe, env-sensitive integration tests, and shared PEM
fixtures also live in `codex-client`, which is now the actual owner of
the behavior they exercise.
## Observability
The shared CA path logs:
- which environment variable selected the bundle
- which path was loaded
- how many certificates were accepted
- when `TRUSTED CERTIFICATE` labels were normalized
- when CRLs were ignored
- where client construction failed
Returned errors remain user-facing and include the relevant env var,
path, and remediation hint. That same error model now applies whether
the failure surfaced while building a reqwest client or websocket TLS
configuration.
## Tests
Pure unit tests in `codex-client` cover env precedence and PEM
normalization behavior. Real client construction remains in subprocess
tests so the suite can control process env and avoid the macOS seatbelt
panic path that motivated the hermetic test split.
The subprocess coverage verifies:
- `CODEX_CA_CERTIFICATE` precedence over `SSL_CERT_FILE`
- fallback to `SSL_CERT_FILE`
- single-cert and multi-cert bundles
- malformed and empty-file errors
- OpenSSL `TRUSTED CERTIFICATE` handling
- CRL tolerance for well-formed CRL sections
The websocket side is covered by the existing `codex-api` / `codex-core`
websocket test suites plus the manual mitmproxy validation above.
---------
Co-authored-by: Ivan Zakharchanka <3axap4eHko@gmail.com>
Co-authored-by: Codex <noreply@openai.com>
## Summary
- add one-time session recovery in `RmcpClient` for streamable HTTP MCP
`404` session expiry
- rebuild the transport and retry the failed operation once after
reinitializing the client state
- extend the test server and integration coverage for `404`, `401`,
single-retry, and non-session failure scenarios
## Testing
- just fmt
- cargo test -p codex-rmcp-client (the post-rebase run lost its final
summary in the terminal; the suite had passed earlier before the rebase)
- just fix -p codex-rmcp-client
This PR changes stdio MCP child processes to run in their own process
group
* Add guarded teardown in codex-rmcp-client: send SIGTERM to the group
first, then SIGKILL after a short grace period.
* Add terminate_process_group helper in process_group.rs.
* Add Unix regression test in process_group_cleanup.rs to verify wrapper
+ grandchild are reaped on client drop.
Addresses reported MCP process/thread storm: #10581
We started working with MCP in Codex before
https://crates.io/crates/rmcp was mature, so we had our own crate for
MCP types that was generated from the MCP schema:
8b95d3e082/codex-rs/mcp-types/README.md
Now that `rmcp` is more mature, it makes more sense to use their MCP
types in Rust, as they handle details (like the `_meta` field) that our
custom version ignored. Though one advantage that our custom types had
is that our generated types implemented `JsonSchema` and `ts_rs::TS`,
whereas the types in `rmcp` do not. As such, part of the work of this PR
is leveraging the adapters between `rmcp` types and the serializable
types that are API for us (app server and MCP) introduced in #10356.
Note this PR results in a number of changes to
`codex-rs/app-server-protocol/schema`, which merit special attention
during review. We must ensure that these changes are still
backwards-compatible, which is possible because we have:
```diff
- export type CallToolResult = { content: Array<ContentBlock>, isError?: boolean, structuredContent?: JsonValue, };
+ export type CallToolResult = { content: Array<JsonValue>, structuredContent?: JsonValue, isError?: boolean, _meta?: JsonValue, };
```
so `ContentBlock` has been replaced with the more general `JsonValue`.
Note that `ContentBlock` was defined as:
```typescript
export type ContentBlock = TextContent | ImageContent | AudioContent | ResourceLink | EmbeddedResource;
```
so the deletion of those individual variants should not be a cause of
great concern.
Similarly, we have the following change in
`codex-rs/app-server-protocol/schema/typescript/Tool.ts`:
```
- export type Tool = { annotations?: ToolAnnotations, description?: string, inputSchema: ToolInputSchema, name: string, outputSchema?: ToolOutputSchema, title?: string, };
+ export type Tool = { name: string, title?: string, description?: string, inputSchema: JsonValue, outputSchema?: JsonValue, annotations?: JsonValue, icons?: Array<JsonValue>, _meta?: JsonValue, };
```
so:
- `annotations?: ToolAnnotations` ➡️ `JsonValue`
- `inputSchema: ToolInputSchema` ➡️ `JsonValue`
- `outputSchema?: ToolOutputSchema` ➡️ `JsonValue`
and two new fields: `icons?: Array<JsonValue>, _meta?: JsonValue`
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/openai/codex/pull/10349).
* #10357
* __->__ #10349
* #10356
Summary
- require `CODEX_HOME` to point to an existing directory before
canonicalizing and surface clear errors otherwise
- share the same helper logic in both `core` and `rmcp-client` and add
unit tests that cover missing, non-directory, valid, and default paths
This addresses #9222
### What
Add JSON Schema generation for `config.toml`, with checked‑in
`docs/config.schema.json`. We can move the schema elsewhere if preferred
(and host it if there's demand).
Add fixture test to prevent drift and `just write-config-schema` to
regenerate on schema changes.
Generate MCP config schema from `RawMcpServerConfig` instead of
`McpServerConfig` because that is the runtime type used for
deserialization.
Populate feature flag values into generated schema so they can be
autocompleted.
### Tests
Added tests + regenerate script to prevent drift. Tested autocompletions
using generated jsonschema locally with Even Better TOML.
https://github.com/user-attachments/assets/5aa7cd39-520c-4a63-96fb-63798183d0bc
This PR introduces a `codex-utils-cargo-bin` utility crate that
wraps/replaces our use of `assert_cmd::Command` and
`escargot::CargoBuild`.
As you can infer from the introduction of `buck_project_root()` in this
PR, I am attempting to make it possible to build Codex under
[Buck2](https://buck2.build) as well as `cargo`. With Buck2, I hope to
achieve faster incremental local builds (largely due to Buck2's
[dice](https://buck2.build/docs/insights_and_knowledge/modern_dice/)
build strategy, as well as benefits from its local build daemon) as well
as faster CI builds if we invest in remote execution and caching.
See
https://buck2.build/docs/getting_started/what_is_buck2/#why-use-buck2-key-advantages
for more details about the performance advantages of Buck2.
Buck2 enforces stronger requirements in terms of build and test
isolation. It discourages assumptions about absolute paths (which is key
to enabling remote execution). Because the `CARGO_BIN_EXE_*` environment
variables that Cargo provides are absolute paths (which
`assert_cmd::Command` reads), this is a problem for Buck2, which is why
we need this `codex-utils-cargo-bin` utility.
My WIP-Buck2 setup sets the `CARGO_BIN_EXE_*` environment variables
passed to a `rust_test()` build rule as relative paths.
`codex-utils-cargo-bin` will resolve these values to absolute paths,
when necessary.
---
[//]: # (BEGIN SAPLING FOOTER)
Stack created with [Sapling](https://sapling-scm.com). Best reviewed
with [ReviewStack](https://reviewstack.dev/openai/codex/pull/8496).
* #8498
* __->__ #8496
## Summary
Builds on FreeBSD and OpenBSD were failing due to globally enabled
Linux-specific keyring features and hardening code paths not gated by
OS. This PR scopes keyring native backends to the
appropriate targets, disables default features at the workspace root,
and adds a BSD-specific hardening function. Linux/macOS/Windows behavior
remains unchanged, while FreeBSD/OpenBSD
now build and run with a supported backend.
## Key Changes
- Keyring features:
- Disable keyring default features at the workspace root to avoid
pulling Linux backends on non-Linux.
- Move native backend features into target-specific sections in the
affected crates:
- Linux: linux-native-async-persistent
- macOS: apple-native
- Windows: windows-native
- FreeBSD/OpenBSD: sync-secret-service
- Process hardening:
- Add pre_main_hardening_bsd() for FreeBSD/OpenBSD, applying:
- Set RLIMIT_CORE to 0
- Clear LD_* environment variables
- Simplify process-hardening Cargo deps to unconditional libc (avoid
conflicting OS fragments).
- No changes to CODEX_SANDBOX_* behavior.
## Rationale
- Previously, enabling keyring native backends globally pulled
Linux-only features on BSD, causing build errors.
- Hardening logic was tailored for Linux/macOS; BSD builds lacked a
gated path with equivalent safeguards.
- Target-scoped features and BSD hardening make the crates portable
across these OSes without affecting existing behavior elsewhere.
## Impact by Platform
- Linux: No functional change; backends now selected via target cfg.
- macOS: No functional change; explicit apple-native mapping.
- Windows: No functional change; explicit windows-native mapping.
- FreeBSD/OpenBSD: Builds succeed using sync-secret-service; BSD
hardening applied during startup.
## Testing
- Verified compilation across affected crates with target-specific
features.
- Smoke-checked that Linux/macOS/Windows feature sets remain identical
functionally after scoping.
- On BSD, confirmed keyring resolves to sync-secret-service and
hardening compiles.
## Risks / Compatibility
- Minimal risk: only feature scoping and OS-gated additions.
- No public API changes in the crates; runtime behavior on non-BSD
platforms is preserved.
- On BSD, the new hardening clears LD_*; this is consistent with
security posture on other Unix platforms.
## Reviewer Notes
- Pay attention to target-specific sections for keyring in the affected
Cargo.toml files.
- Confirm pre_main_hardening_bsd() mirrors the safe subset of
Linux/macOS hardening without introducing Linux-only calls.
- Confirm no references to CODEX_SANDBOX_ENV_VAR or
CODEX_SANDBOX_NETWORK_DISABLED_ENV_VAR were added/modified.
## Checklist
- Disable keyring default features at workspace root.
- Target-specific keyring features mapped per OS
(Linux/macOS/Windows/BSD).
- Add BSD hardening (RLIMIT_CORE=0, clear LD_*).
- Simplify process-hardening dependencies to unconditional libc.
- No changes to sandbox env var code.
- Formatting and linting: just fmt + just fix -p for changed crates.
- Project tests pass for changed crates; broader suite unchanged.
---------
Co-authored-by: celia-oai <celia@openai.com>
## What?
Fixes MCP server initialization failures on Windows when using
script-based tools like `npx`, `pnpm`, and `yarn` that rely on
`.cmd`/`.bat` files rather than `.exe` binaries.
Fixes#2945
## Why?
Windows users encounter "program not found" errors when configuring MCP
servers with commands like `npx` in their `~/.codex/config.toml`. This
happens because:
- Tools like `npx` are batch scripts (`npx.cmd`) on Windows, not
executable binaries
- Rust's `std::process::Command` bypasses the shell and cannot execute
these scripts directly
- The Windows shell normally handles this by checking `PATHEXT` for
executable extensions
Without this fix, Windows users must specify full paths or add `.cmd`
extensions manually, which breaks cross-platform compatibility.
## How?
Added platform-specific program resolution using the `which` crate to
find the correct executable path:
- **Windows**: Resolves programs through PATH/PATHEXT to find
`.cmd`/`.bat` scripts
- **Unix**: Returns the program unchanged (no-op, as Unix handles
scripts natively)
### Changes
- Added `which = "6"` dependency to `mcp-client/Cargo.toml`
- Implemented `program_resolver` module in `mcp_client.rs` with
platform-specific resolution
- Added comprehensive tests for both Windows and Unix behavior
### Testing
Added platform-specific tests to verify:
- Unix systems execute scripts without extensions
- Windows fails without proper extensions
- Windows succeeds with explicit extensions
- Cross-platform resolution enables successful execution
**Tested on:**
- Windows 11 (NT 10.0.26100.0 x64)
- PowerShell 5.1 & 7+, CMD, Git Bash
- MCP servers: playwright, context7, supabase
- WSL (verified no regression)
**Local checks passed:**
```bash
cargo test && cargo clippy --tests && cargo fmt -- --config imports_granularity=Item
```
### Results
**Before:**
```
🖐 MCP client for `playwright` failed to start: program not found
```
**After:**
```
🖐 MCP client for `playwright` failed to start: request timed out
```
Windows users can now use simple commands like `npx` in their config
without specifying full paths or extensions. The timeout issue is a
separate concern that will be addressed in a follow-up PR.
---------
Co-authored-by: Eric Traut <etraut@openai.com>
Follow-up PR to #5569. Add Keyring Support for Auth Storage in Codex CLI
as well as a hybrid mode (default to persisting in keychain but fall
back to file when unavailable.)
It also refactors out the keyringstore implementation from rmcp-client
[here](https://github.com/openai/codex/blob/main/codex-rs/rmcp-client/src/oauth.rs)
to a new keyring-store crate.
There will be a follow-up that picks the right credential mode depending
on the config, instead of hardcoding `AuthCredentialsStoreMode::File`.
This makes stdio mcp servers more flexible by allowing users to specify
the cwd to run the server command from and adding additional environment
variables to be passed through to the server.
Example config using the test server in this repo:
```toml
[mcp_servers.test_stdio]
cwd = "/Users/<user>/code/codex/codex-rs"
command = "cargo"
args = ["run", "--bin", "test_stdio_server"]
env_vars = ["MCP_TEST_VALUE"]
```
@bolinfest I know you hate these env var tests but let's roll with this
for now. I may take a stab at the env guard + serial macro at some
point.
This adds a queryable auth status for MCP servers which is useful:
1. To determine whether a streamable HTTP server supports auth or not
based on whether or not it supports RFC 8414-3.2
2. Allow us to build a better user experience on top of MCP status
This PR adds oauth login support to streamable http servers when
`experimental_use_rmcp_client` is enabled.
This PR is large but represents the minimal amount of work required for
this to work. To keep this PR smaller, login can only be done with
`codex mcp login` and `codex mcp logout` but it doesn't appear in `/mcp`
or `codex mcp list` yet. Fingers crossed that this is the last large MCP
PR and that subsequent PRs can be smaller.
Under the hood, credentials are stored using platform credential
managers using the [keyring crate](https://crates.io/crates/keyring).
When the keyring isn't available, it falls back to storing credentials
in `CODEX_HOME/.credentials.json` which is consistent with how other
coding agents handle authentication.
I tested this on macOS, Windows, WSL (ubuntu), and Linux. I wasn't able
to test the dbus store on linux but did verify that the fallback works.
One quirk is that if you have credentials, during development, every
build will have its own ad-hoc binary so the keyring won't recognize the
reader as being the same as the write so it may ask for the user's
password. I may add an override to disable this or allow
users/enterprises to opt-out of the keyring storage if it causes issues.
<img width="5064" height="686" alt="CleanShot 2025-09-30 at 19 31 40"
src="https://github.com/user-attachments/assets/9573f9b4-07f1-4160-83b8-2920db287e2d"
/>
<img width="745" height="486" alt="image"
src="https://github.com/user-attachments/assets/9562649b-ea5f-4f22-ace2-d0cb438b143e"
/>
This PR adds support for streamable HTTP MCP servers when the
`experimental_use_rmcp_client` is enabled.
To set one up, simply add a new mcp server config with the url:
```
[mcp_servers.figma]
url = "http://127.0.0.1:3845/mcp"
```
It also supports an optional `bearer_token` which will be provided in an
authorization header. The full oauth flow is not supported yet.
The config parsing will throw if it detects that the user mixed and
matched config fields (like command + bearer token or url + env).
The best way to review it is to review `core/src` and then
`rmcp-client/src/rmcp_client.rs` first. The rest is tests and
propagating the `Transport` struct around the codebase.
Example with the Figma MCP:
<img width="5084" height="1614" alt="CleanShot 2025-09-26 at 13 35 40"
src="https://github.com/user-attachments/assets/eaf2771e-df3e-4300-816b-184d7dec5a28"
/>
The [official Rust
SDK](57fc428c57)
has come a long way since we first started our mcp client implementation
5 months ago and, today, it is much more complete than our own
stdio-only implementation.
This PR introduces a new config flag `experimental_use_rmcp_client`
which will use a new mcp client powered by the sdk instead of our own.
To keep this PR simple, I've only implemented the same stdio MCP
functionality that we had but will expand on it with future PRs.
---------
Co-authored-by: pakrym-oai <pakrym@openai.com>
